Home > Heating > Ventless Heaters >

HeatStar 30,000 BTU Vent-Free Wall Mount Heater - Natural Gas
HeatStar 30,000 BTU Vent-Free Wall Mount Heater



  • 30,000 BTU/HR
  • Fuel Type: Natural Gas
  • Heats up to 1,000 sq. ft.
  • 99.9% Efficient
  • Dimensions (W x D x H): 23.5" x 8" x 24"
  • Includes factory installed blower fan and thermostat
Our Price: $249.95


Description Product Manual
  • 30,000 BTU/HR
  • Heats up to 1000 sq. ft.
  • Includes factory installed blower fan and thermostat
  • Battery operated electronic ignition
  • Easy to read room temperature display
  • Dimensions (W x D x H): 23.5" x 8" x 24"
  • Weight: 31 lbs


  • Convenient - top mounted comfort control with adjustable settings
  • Safe - low oxygen shutoff sensor
  • Easy to install - wall mount or free standing (feet included)
  • Economical 99.9% efficient
  • Operates without electricity
  • Limited 1-year warranty
  • No venting or chimney required
  • Tools needed for installation: Phillips screwdriver and a pipe wrench
  • Check local codes for installation requirements


  • Recreation rooms
  • Room additions
  • Workshops
  • Enclosed porches
  • Cabins
  • Ice houses
  • Lodges

Important Safeguards:

Owner's manual must be read prior to installation and operation of heater. This heater cannot be converted between natural gas and propane. Professional installation is recommended. Always check local codes for permitted uses. Not recommended for operation above 4,500 feet. Use adequate ventilation during operation. See owner's manual regarding warranty information and disclaimers.


This appliance is to be used as a supplemental heat source and should not be used as the primary heat source. This heater must be installed and serviced according to the manufacturer's instructions and state and local building codes. Select a model with the appropriate heat output using sizing guidelines provided by the manufacturer. Using the heater with greater heat output then recommended may be harmful to your health. As with other fuel burning appliances, local building codes may require installation of a carbon monoxide detector in the area where the heater is installed.

Product specifications subject to change without notice.

This heater obtained the indicated BTU ratings when tested per ANSI Z21.11.2-2002, addenda Z21.11.2a-2003 "Gas Fired Room Heaters", Volume II, "Unvented Room Heaters."

Note: Some states prohibit the use of unvented heaters. Check local regulations.

Note: Not for use in bathrooms, bedrooms or recreational vehicles.

Vent-Free Gas Heaters
How do I know that Vent-Free Gas Heating Products Are Safe?

Share your knowledge of this product. Be the first to write a review »